08 Oct Garage Door Opener Installation
You’re in the market for a new garage door opener. Maybe your old one stopped working, you’re due for an upgrade, or installing for the first time. Since the process can be quite involved, it’s important that you take a step back and do a little homework before moving forward. The first thing you need to research is what type of opener you want to get. In fact, the garage door opener installation process depends entirely on which one you choose.
The 3 Types of Garage Door Openers
These garage openers use a belt to open the door. This is the least noisy of your options. Though a bit pricier, they may be worth it if you have an attached garage and noise is a concern.
Screw drive openers have fewer components than their alternatives, so they generally require less maintenance over their lifetime. They can be louder than belt drives, however, a plastic-lined track can reduce the noise.
The most common type of garage door opener, a chain drive opener utilizes a chain to push or pull the trolley that lifts your garage door. While they are the noisiest option, they are also the most dependable and economical.
The Installation Process
Once you’ve chosen the type of opener you want, it’s time to get it set up! Garage door opener installation can actually be quite dangerous, so do not hesitate to hire a trained professional if you are even the slightest bit unsure that you’re up to the task. Here’s a brief rundown on the steps taken by the installer:
- Test the garage door for balance.
Caution: If anything seems amiss, it could the torsion spring. If the spring happens to be broken, the professional will need to replace it. Anything involving torsion springs should be left to a trained professional. Torsion springs are under extreme pressure, and attempting to repair oneself could cause severe injury or even death.
- Install the rail sections, trolley, and connect the opener to the power unit.
Caution: As this portion of the setup involves electrical work, it is important that the installer or licensed electrician work on the wiring.
- Tighten the tension (depending on which opener you chose).
- Install the power unit.
- Attach the opener to the door.
- Install the wall controller.
- Set up safety sensors for each side of the door.
- Set travel limits.
- Test operation.
After any final adjustments, the installer will give you the thumbs up to begin using your brand new garage door opener!
Elk Grove Garage Door Co. can help!
Whether you need garage door opener maintenance, replacement, or installation, Elk Grove Garage Door Co. is just a phone call away! Call (916) 407-3443 to schedule your appointment any time of day or night![/vc_column_text][/vc_column][/vc_row]